DIY Tips- Replacing Old Exterior Door Handles with New UPVC Ones

Transform your home’s facade with these foolproof steps to replace tired exterior door handles with gleaming new UPVC ones. Let’s embark on a journey of rejuvenation for your home’s entrance!

Prerequisites:

– New UPVC door handles

– Screwdriver

– Pliers or wrench

– Tape measure

– Spirit level (optional)

Step-by-Step Guide:

1. Safety First

Don your safety gear, including gloves and eye protection. Electrical work or power tools are not required for this project.

2. Remove Existing Handles

Using a screwdriver, gently loosen the screws holding the old handles in place. Carefully pull the handles away from the door.

3. Mark New Handle Positions

Measure the distance between the existing screw holes and mark the corresponding positions on the new handles using the tape measure.

4. Install Handle Spindles

Insert the provided handle spindles into the marked positions on the new handles. Align them with the holes on the door and tighten the screws.

5. Align and Secure Handles

Place the new handles over the spindles, ensuring they fit snugly against the door. Tighten the screws securely, ensuring the handles are level using the spirit level (optional).

6. Adjust and Test

Tighten the grub screws on the inside of the handles to adjust the handle tightness. Test the handles by turning them to ensure smooth operation.

7. Voilà!

Marvel at your newly rejuvenated exterior door, complete with elegant UPVC handles. It’s a simple yet transformative upgrade that will elevate the curb appeal of your home.

Conclusion:

Replacing exterior door handles with new UPVC ones is a straightforward task that can revitalize your home’s entrance. By following these step-by-step instructions, you can confidently tackle this DIY project and give your home a fresh and welcoming look. Enjoy the satisfaction of enhancing your curb appeal and adding a touch of style to your front door!