Installation Tips- How to Properly Install Tilt and Turn Handles

If you’re looking to upgrade the functionality and style of your windows, installing tilt and turn handles is an excellent option. These handles provide a secure and convenient way to open and close your windows, and they can add a touch of elegance to your home.

However, installing tilt and turn handles can be a bit tricky, so it’s important to follow the instructions carefully. Here are a few tips to help you get the job done right:

Materials You’ll Need

Before you start, gather the following materials:

New tilt and turn handles

Screwdriver

Drill

Measuring tape

Step-by-Step Instructions

1. Remove the Old Handles

Start by unscrewing the old handles from the window frame. Be careful not to damage the window frame.

2. Measure the Screw Holes

Once the old handles are removed, measure the distance between the screw holes. This will help you determine the size of the new handles you need.

3. Mark the Screw Holes

Use a pencil to mark the screw holes on the window frame. Make sure the marks are level and centered.

4. Drill Pilot Holes

Drill pilot holes at the marks you made. The pilot holes should be slightly smaller than the screws that came with the new handles.

5. Install the New Handles

Insert the new handles into the pilot holes and tighten the screws. Be sure to tighten the screws securely, but do not overtighten them.

6. Test the Handles

Once the handles are installed, test them to make sure they work properly. The handles should open and close the window smoothly.

Troubleshooting Tips

If you encounter any problems during the installation process, here are a few troubleshooting tips:

If the handles are not opening or closing smoothly, check to make sure that the screws are tightened securely.

If the handles are loose, try tightening the screws further.

If the handles are still not working properly, you may need to contact a professional to help you troubleshoot the issue.

Conclusion

Installing tilt and turn handles is a relatively simple project that can be completed in a few hours. By following these tips, you can ensure that your new handles are installed correctly and that they work properly.