Installation Tips for Double Glazed Door Handles

Double glazed doors offer a range of benefits, including improved insulation, noise reduction, and increased security. However, installing double glazed door handles can be a tricky task if you’re not familiar with the process. In this article, we’ll provide you with step-by-step instructions on how to install double glazed door handles, as well as some tips and tricks to make the job easier.

1. Gather Your Tools and Materials

Before you begin, you’ll need to gather the following tools and materials:

A screwdriver

A drill

A tape measure

A pencil

A level

Double glazed door handles

Screws

2. Mark the Location of the Door Handles

The first step is to mark the location of the door handles. Use a tape measure to measure the distance from the top and bottom of the door to the center of the handle. Mark these locations with a pencil.

3. Drill the Holes for the Door Handles

Once you have marked the location of the door handles, you need to drill the holes for the screws. Use a drill bit that is the same size as the screws you are using. Drill the holes at a slight angle so that the screws will go in straight.

4. Insert the Screws

Once you have drilled the holes, insert the screws into the holes. Tighten the screws until the door handles are secure.

5. Test the Door Handles

Once the door handles are installed, test them to make sure they are working properly. Open and close the door a few times to make sure the handles are working smoothly.